Quality Laboratory

I. Equipment Name: Electronic Densimeter

II. Equipment Model: DH-300

III. Equipment Parameters:

Weighing Range: 0.01g~300g

Density Resolution: 0.001g/cm3

IV. Test Scope:

It is ok if the density range is larger than 1 or smaller than 1

Conforming to Standards: GB1033.1

I. Equipment Name: Salt Spray Corrosion Test Chamber

II. Equipment Model: GP/YWP-60

III. Equipment Parameters

Input Characteristics: 220VAC, 30A

Capacity of the Measuring Tank: 50ml

IV. Test Scope

Conducting the corrosion resistance test for metal parts such as terminals and nuts

Conforming to Standards: BS EN ISO 9227 GB/T6461 GB/T2423.17

Experiment Time Setting Range: 1S～9999.9hr

Air Pressure Setting: 0～1kgf/cm2

Saturated Air Barrel Temperature Setting: Room Temperature～80℃

I. Equipment Name: High-low Temperature Test Chamber

II. Equipment Model: GP/T-100

III. Equipment Parameters

Input Characteristics: 220VAC, 30A

Inner Box Size: 500cm×W)×750cm(H)×750cm(D)

IV. Test Scope

Conducting the test for assembled harnesses and materials (such as wires, adhesive tapes, corrugated pipes, ties, snaps, corrugated pipe clamps, plugs and stands)

Conforming to Standards: QC/T 417.1～417.5,QC/T 29106,ISO 6722,VW60306, VW60360,VW60307,VW50123

Experiment Time Setting Range: 0～9999.9hr

Air Pressure Setting: 0～1kgf/cm2

Temperature Setting Range: -60℃～150℃

Humidity Setting Range: 20%RH～98%RH

I. Equipment Name: Horizontally-tilt Single-wire Combustion Tester

II. Equipment Model: YN21030

III. Equipment Parameters:

Power of Exhaust Fan: 220VAC

Inner Box Size: 80cm(W)×900cm(H)×60cm (D)

IV. Test Scope

Conducting the fire retardancy test for wires

Conforming to Standards: ISO 6722, ISO3795, VW60306, VW60360

Flame Height: 20-175mm

Flame Testing Angle: 0-45°

Flame Ignition Time and Sustained Combustion Time: 1-99 minutes and 99 seconds

I. Equipment Name: Microprocessor-controlled Universal Material Testing Machine

II. Equipment Model: CTM8050

III. Equipment Parameters:

Input Characteristics: 220VAC

Equipment Weight: 400Kg

Outline Dimension: 850×780×18800mm (L×W×H)

IV. Test Scope

Conducting the push-pull test for terminals, crimped parts of wires, copper wires, copper bars and copper plates, ejecting force of bolts, etc.

Conforming to Standards: QC/T 417.1～417.5,QC/T 29106,ISO 6722000,VW60306,VW60330,VW60360,VW60307

Measurement Range: 0～2500N

Tension Speed Adjustment Range: 25～500mm/M

Extended Distance Measurement Range: 0～1000mm

I. Equipment Name: Spectrograph

II. Equipment Model: EDX3600H

III. Equipment Parameters

Input Characteristics: 110VAC

Inner Box Size: Ф32cm(W)×10cm(H)

IV. Measuring Range

Conducting the test for metal content, metal coating thickness and environmentally harmful substances

Conforming to Standards: GB20078 GB/T2059 DIN EN12165 DIN EN1652 GBT5231 JISG4318 VW13750 DIN5095 ELV Decree

2000/53/EC

Accuracy: 0.15%

Resolution: 0.0001%

I. Equipment Name: Auto Wire Scratch Resistance Test Machine

II. Equipment Model: CY-797

III. Equipment Parameters

Input Characteristics: 50Hz,220VAC

Output Power: 200W;

IV. Test Scope

Conducting the scratch resistance test for insulating layers of wires

Conforming to Standards: ISO 6722, VW60306

Scratch Thickness: 3mm

Scratchy Needle Diameter: 0.45±0.01mm/0.25±0.01mm

Scratch Method: Scratching back and forth in the direction of the wire length, with the stroke being 10±1mm

Test Times: 0～9999 (×1,×10,×100)

Scratchy Needle Pressure: 400g,700g and 1000g weights,optional

I. Equipment Name: Metallurgical Microscopy

II. Equipment Model: FLY-2003

III. Equipment Parameters

Input Characteristics: 220VAC;

IV. Test Scope

Conducting the measurement of the average grain size of metal-average grain size of pearlite and the surface marking measurement

Conforming to Standards: GB 6394-2002

Measurement Range: 4×30～40×30times

Equipment Accuracy: 2～3μm

I. Equipment Name: Terminal Cross-section Analyzer

II. Equipment Model: FM-Section3

III. Equipment Parameters

Input Characteristics: 220V±22V;

IV. Test Scope

Conducting the measurement of sizes such as the terminal crimping width, height, height/width ratio, crimping area, angle, etc. (Point, Line, Circle, Area, Perimeter, Angle, Distance, Arc, Chord, etc.)

Conforming to Standards: VW603 06

Cutting Scope: 0.01~33.62mm2

Equipment Accuracy: 0.001mm

I. Equipment Name: Voltage Drop Tester

II.Equipment Model：HC6KV

III. Equipment Parameter

Input characteristic

Loading effect: 0.2%+20mV， 0.1%+100mA

Kilowatt-hour meter precision: 1%±2 byte

IV. Test Item

Test for the crimp point between terminal and wire, connection point between two wires

Conform to the standard: QC/T 417.1～417.5、QC/T 29106、ISO 6722、VW60330、 VW60307

Output voltage: 0～30V DV

Output current: 0～300A DC

Voltage drop measuring range: